Description
DFMD-SZ is a reliable single piece walk-through metal detector system that does not require a separate control unit. It has been developed to detect clandestine ferrous and nonferrous metals on the body of a person when asked to pass through the door frame. Special ferrite detection circuitry has been employed to detect weapons concealed in ferrite containers.
It has been designed for fast installation and operation under all environments. Long life LED Walk/Stop indicators are incorporated on top of the door frame to regulate the flow of traffic. All controls and audio/visual alarms such as Piezo transducer, LED bar graph, indicator lamps and sensitivity controls are provided at the rear top of the door. Small, medium and large metal objects are indicated by three separate large sized LED indicators that have a wide viewing angle.
Power Source:
SMPS power supply for use with 90V to 270V and 12V/7AH Battery Seamless battery changeover in case of mains failure Batteries are internally and automatically charged during operation
Power Consumption:
Less than 40 Watts
Operating Principal:
Delta-Q Auto calibration
Operating Frequency:
20 kHz (nominal) Sine Wave
Indicators:
a)GREEN LED “WALK” Indicator b)RED LED “STOP” Indicator c)10 STEP LED BAR-GRAPH Indicator d)LOW / MEDIUM / HIGH LED Indicator lights e)BLUE LED to indicate battery operation
Sensors:
Infrared sensors are incorporated to prevent metal outside the door frame from interfering with the system.
Sensitivity:
10-Step adjustable sensitivity from Low to detect objects like grenades, Guns and Swords to High to detect objects like watches, keys etc.
Alarm:
Loud piezoelectric alarm with two-step volume control .
Controls:
i) ON/OFF Switch ii) VOLUME HIGH/LOW Switch iii) 10 Position SENSITIVITY Switch
Passage Clearance:
6 ft 6″ x 2 ft 6″